ОПЫТ! Самодиагностика климат-контроля.
Posted: 22 Mar 2006, 22:35
Кто у нас спец по англицкому?
With the ignition off, whilst pushing both the buttons marked 'auto ' and the air re-circulate one with the picture of an arrow curling to the right, turn on the ignition.
All the little green indicators will flash, and the screen shows 00. press again the air re-circulate button and the system goes to sensor check. it goes thro all the heater vent controls, the button functions, incl front screen de-ice, temp change, etc, and a code appears in the display.
These are the codes
00=normal
11=inside temp. sensor
12=outside t/s.
13=After evap. sensor
14=water temp.heater radiator
21=solar sensor
22=compressor lock detected[short of refrigerant does this one]
23=coolant pressure
31=air-mix servo potentiometer
32=IN/OUT change damper servo potentiometer
33=Mode damper S/p
41=air-mix damper S/p.
42=IN/OUT change damper S/p
43 mode damper s/p
To cancel push the 'off' button
With the ignition off, whilst pushing both the buttons marked 'auto ' and the air re-circulate one with the picture of an arrow curling to the right, turn on the ignition.
All the little green indicators will flash, and the screen shows 00. press again the air re-circulate button and the system goes to sensor check. it goes thro all the heater vent controls, the button functions, incl front screen de-ice, temp change, etc, and a code appears in the display.
These are the codes
00=normal
11=inside temp. sensor
12=outside t/s.
13=After evap. sensor
14=water temp.heater radiator
21=solar sensor
22=compressor lock detected[short of refrigerant does this one]
23=coolant pressure
31=air-mix servo potentiometer
32=IN/OUT change damper servo potentiometer
33=Mode damper S/p
41=air-mix damper S/p.
42=IN/OUT change damper S/p
43 mode damper s/p
To cancel push the 'off' button